大 Project

[bono]

[大口仔/ Bigmouthboy]

嘩,好大個電箱

may I ask what is the brand of the fuse box, and what brand of electric wire are you using?

The main switch box is Siemens but I use Merlin Gerin individual fuse (I am not sure if it is the best and may change later). It can be easily recognised when you go to those shops which sell this kind of product.

http://www.merlin-gerin.com/MG/en/index.htm

For the power cables used inside, I mainly use AEI

I use 4 x AEI cables (2.5mm) for AV and HiFi system, and one multi threads AEI for one power socket (will try if it is good for Power amp power supply in future) .

i.e. Three AEI 2.5mm for AV system (one of the AEI for Subwoofer power supply) and one AEI 2.5mm & one multi-thread AEI for HiFi system.

For non essential AV equipment (e.g. TV) & ordinary electrical appliances then I don't know.

Hope this helps!

P.S. it is because I have no more spare fuse so I use ordinary power cable for the power supply to Projector.

thanks. is this also the fuse box for the house, or only AV?
3-phase electric?

The fuse box is for the whole apartment while I run 5 invidual fuse for 5 individual power sockets.

3-phase electric? << no ar

[luckybeanbean]

嘩,好大個電箱

may I ask what is the brand of the fuse box, and what brand of electric wire are you using?

The main switch box is Siemens but I use Merlin Gerin individual fuse (I am not sure if it is the best and may change later). It can be easily recognised when you go to those shops which sell this kind of product.

http://www.merlin-gerin.com/MG/en/index.htm

For the power cables used inside, I mainly use AEI

I use 4 x AEI cables (2.5mm) for AV and HiFi system, and one multi threads AEI for one power socket (will try if it is good for Power amp power supply in future) .

i.e. Three AEI 2.5mm for AV system (one of the AEI for Subwoofer power supply) and one AEI 2.5mm & one multi-thread AEI for HiFi system.

For non essential AV equipment (e.g. TV) & ordinary electrical appliances then I don't know.

Hope this helps!

P.S. it is because I have no more spare fuse so I use ordinary power cable for the power supply to Projector.

thanks. is this also the fuse box for the house, or only AV?
3-phase electric?

The fuse box is for the whole apartment while I run 5 invidual fuse for 5 individual power sockets.

3-phase electric? << no ar

thanks.
I am planning my electric also

[Melvin Woo]

Busy Busy.......

Just walk by and your post...

You better install a separate grounding system too...

According to your pics. ....Your grounds run into the main panel's main ground.....That ground contains all the noise from your building....You can test it by running a bare wire from it and hook it to your tuner(use it as an antenna)...Then...you'll know..

You can run all the gnd. wires to the coming tap...(cold)..that's the best gnd.....crystal clear

For subwoofer...If you want more solid bass...you better run solid core....If you want Faster bass...you have to run silver plated copper as in-wall power cord...

[billyla]

Busy Busy.......

Just walk by and your post...

You better install a separate grounding system too...

According to your pics. ....Your grounds run into the main panel's main ground.....That ground contains all the noise from your building....You can test it by running a bare wire from it and hook it to your tuner(use it as an antenna)...Then...you'll know..

You can run all the gnd. wires to the coming tap...(cold)..that's the best gnd.....crystal clear

For subwoofer...If you want more solid bass...you better run solid core....If you want Faster bass...you have to run silver plated copper as in-wall power cord...

fantastic!

[cheuk yu爸爸]

http://www.av100fun.com/viewtopic.php?t ... sc&start=0

[YKMing]

photo
photo
photo
photo
photo
photo

[KY]

I am planning my electric also

[大口仔/ Bigmouthboy]

Busy Busy.......

Just walk by and your post...

You better install a separate grounding system too...

According to your pics. ....Your grounds run into the main panel's main ground.....That ground contains all the noise from your building....You can test it by running a bare wire from it and hook it to your tuner(use it as an antenna)...Then...you'll know..

You can run all the gnd. wires to the coming tap...(cold)..that's the best gnd.....crystal clear

For subwoofer...If you want more solid bass...you better run solid core....If you want Faster bass...you have to run silver plated copper as in-wall power cord...

[AVDaemon]

[hero]

[火星人]

起貨未呀

[大口仔/ Bigmouthboy]

起貨未呀

重有排呀

[Hin]

起貨未呀

重有排呀

其待..

[仕嘉]

起貨未呀

重有排呀

其待..