ICEPower amplifier 成品機出場

[scala]

[scala]

Machine number 2 completed

[billyla]

I found many of you is very interested to the cost. All I could tell is the total cost of raw material is not less than 20k. But this cost is not included my labor and those tools used for assemble. Since the professional tools is very expensive, I am glad that some of my friends share their technic and tools to me in making this amp.

You meant over 20K ? That's not cheap for a DIY amp.

scala, you have used a lot of expensive capacitors and resistors?

But looking at the pictures, I don't think that's the case. (Infact quite average parts )

maybe the modules are quite expensive to get

can't see, the pic are removed

[scala]

I found many of you is very interested to the cost. All I could tell is the total cost of raw material is not less than 20k. But this cost is not included my labor and those tools used for assemble. Since the professional tools is very expensive, I am glad that some of my friends share their technic and tools to me in making this amp.

You meant over 20K ? That's not cheap for a DIY amp.

scala, you have used a lot of expensive capacitors and resistors?

But looking at the pictures, I don't think that's the case. (Infact quite average parts )

maybe the modules are quite expensive to get

can't see, the pic are removed

2號機出場!!!

[破竹]

幾舊"燒賣"加個殼炒埋一碟, side 9 氣!
壞Q左刀唔G典算

[wkw9811]

幾舊"燒賣"加個殼炒埋一碟, side 9 氣!
壞Q左刀唔G典算

ICEPower 模件在 HiFi 界是極有名的模件
在不少著名的品牌亦有使用，
包括 Jeff Rowland，Adam Audio，Pioneer 等。
由於它制作簡單，在 DIY 界亦被廣泛使用。

因為它只以模件形式出售予各品牌生產成品，理論上市面是不會發售的，
亦因有其秘技零件，相信自己是無法維修的。

[scala]

Hi Brother 破竹

The ICEPower module is operating in a relative low temperature due to it high efficiency, and most of components on the board are passive component, I can't see the problem which you concern. They are very stable and reliable.

[wkw9811]

Hi Scala,

How much for 250ASP? Please PM me
Why you not choose ASP in all your Machine?
As I know ASP is the most advanced model

[scala]

ASP series 1號機改裝中, preparing for balanced output AV preamp

Tasks:
1. Replace RCA with XLR connectors
2. Re-organize internal cabling
3. Re-design ground connection (Eliminate ground looping)

Hi Scala,

How much for 250ASP? Please PM me
Why you not choose ASP in all your Machine?
As I know ASP is the most advanced model

[wkw9811]

Hi Scala,

How much for 250ASP? Please PM me
Why you not choose ASP in all your Machine?
As I know ASP is the most advanced model

Hi Scala,

Re
Further, Do you have ground loop hum issue?

[Romrom-100Fun]

[heihei]

[scala]

There are no hum problem actually, just want to consolidate the audio ground contact points and follow the principle of single ground point.

Hi Scala,

How much for 250ASP? Please PM me
Why you not choose ASP in all your Machine?
As I know ASP is the most advanced model

Hi Scala,

Re
Further, Do you have ground loop hum issue?

[wkw9811]

There are no hum problem actually, just want to consolidate the audio ground contact points and follow the principle of single ground point.

Hi Scala,

How much for 250ASP? Please PM me
Why you not choose ASP in all your Machine?
As I know ASP is the most advanced model

Hi Scala,

Re
Further, Do you have ground loop hum issue?

Hi Scala
You still not give me response to my previous question

RGDS

[scala]

The answer is no, no ground loop hum issue

There are no hum problem actually, just want to consolidate the audio ground contact points and follow the principle of single ground point.

Hi Scala,

How much for 250ASP? Please PM me
Why you not choose ASP in all your Machine?
As I know ASP is the most advanced model

Hi Scala,

Re
Further, Do you have ground loop hum issue?

Hi Scala
You still not give me response to my previous question

RGDS