發表人 luckybeanbean 發表於 2005-11-14, 13:24
Group Delay.
This is a measure of how the sub delays certain frequencies with respect to others. Typically the extreme bass will arrive at your ears (or our test mic) a few milliseconds after the rest of the frequencies and the extent to which this happens varies from sub to sub. The smaller and more consistent the group delay is across the frequency range, the better the sub should sound. If group delay becomes excessive it may be audible as 'slowness' in the bass or muddiness. For example, if the bass associated with a bass drum beat arrives after the 'thwack', it may sound ponderous and slow. If they arrive more or less in sync then it will sound 'tight'.
How much group delay is audible? Opinions are divided, but a good rule of thumb is that a time delay of between 1 and 1.5 cycles is just audible. So at 50Hz, group delay should be kept below 20ms (1000/50) and at 20Hz, it should be below 50ms (1000/20) to guarantee inaudibility.
中文話: 睇纒低音爽唔爽快, 50Hz 最好鰠 20ms 以下, 20Hz最好鰠50ms以下.
M&K MX-350 睇鈬最爽快, 應該關佢鮋設計事, 隻單元push-pull, 由頭到尾都咁爽
其他subwoofer都唔差, 但SVS 就弱D 喇