誰在線上

正在瀏覽這個版面的使用者: 沒有註冊會員 和 12 位訪客

機架一問

收集各樣器材討論同報告

文章發表人 chowchow 發表於 2005-04-22, 19:17

willip 寫:Finite Elemente

http://www.finite-elemente.de/e,,produc ... ature.html

Sorry, it should be the Signature series I was talking about before. I don't dare to check out the price for the Master Reference series. :a003: :a003: :a003:


Finite Elemente, 淨係聽個名都知唔講得笑 :a004: :a004: :a004:
HIC LOCUS EST UBI MORS
GAUDET SUCCURRERE VITAE
chowchow
Fun區守護神 - 變淫大金剛
Fun區守護神 - 變淫大金剛
  頭像
 
文章: 52761
來自: 海南島東南沿岸,北部灣以南

註冊時間:
2004-11-27, 10:35

文章發表人 Raymond Wan 發表於 2005-04-22, 21:58

ys 寫:A solid steel H6 partner (black) is approx. $2.5k in yau shing, x/f(can't remember) when I bought my last two H6partners( I have 3) about 8 months ago, free delievery, not a bad deal I think.....



Solid steel is a lot better than my former ikea TV rack(of course) but don't think it is perfect, it still transfers vibration to my turntable and easily heard from spk. I tried once to step the floor very hard(I weight 180lb.) in the other end of the living room(about 8 - 10 feet from the rack) during LP playback, a clear "bump" sound was heard from the spk :a005: It can be caused by the poorly built apartment that I am living in, or just the rack.

If your equipment is very sensitive(TT), better rack or replacing the standard wood(MDF) board is a must.


ys hing

Thanks for your usage experience on the solidsteel racks.

Theoretically, solid metal would transmit vibration very quickly. Therefore, I believe the solidsteel racks will do the same but ultimately these vibrations need to be absorbed or damped by other means such as Linn Skeet or similar as suggested by other AV100Fun brothers here. Please consult other brothers opinion.

:004: :004: :004: :sorry: :sorry: :sorry:

At present, I used a custom-made wooden MDF rack from Sound Mechanics. The performance are acceptable.

I wonder whether those brothers who have used Sound Mechanics Wooden Racks and Solidsteel Racks before can provide me some comments or recommendations or any performance comparisons ??

Some people told me that the sounding charateristics from wooden rack are different from steel rack. Is it true ??

:sorry: :sorry: :sorry: :sorry: :sorry: :sorry:
Have 100% Fun on Sharing AV & HiFi Subjects and Knowledge
圖檔
My Subconscious M&K Combos
圖檔圖檔圖檔圖檔
Welcome to My AV World: Home Theatre
Raymond Wan
Fun區皇室 - PinkG首腦
Fun區皇室 - PinkG首腦
  頭像
 
文章: 26231
來自: 中國一幅地

註冊時間:
2004-11-22, 21:08

文章發表人 ys 發表於 2005-04-23, 22:20

Raymond Wan 寫:
ys 寫:A solid steel H6 partner (black) is approx. $2.5k in yau shing, x/f(can't remember) when I bought my last two H6partners( I have 3) about 8 months ago, free delievery, not a bad deal I think.....



Solid steel is a lot better than my former ikea TV rack(of course) but don't think it is perfect, it still transfers vibration to my turntable and easily heard from spk. I tried once to step the floor very hard(I weight 180lb.) in the other end of the living room(about 8 - 10 feet from the rack) during LP playback, a clear "bump" sound was heard from the spk :a005: It can be caused by the poorly built apartment that I am living in, or just the rack.

If your equipment is very sensitive(TT), better rack or replacing the standard wood(MDF) board is a must.


ys hing

Thanks for your usage experience on the solidsteel racks.

Theoretically, solid metal would transmit vibration very quickly. Therefore, I believe the solidsteel racks will do the same but ultimately these vibrations need to be absorbed or damped by other means such as Linn Skeet or similar as suggested by other AV100Fun brothers here. Please consult other brothers opinion.

:004: :004: :004: :sorry: :sorry: :sorry:

At present, I used a custom-made wooden MDF rack from Sound Mechanics. The performance are acceptable.

I wonder whether those brothers who have used Sound Mechanics Wooden Racks and Solidsteel Racks before can provide me some comments or recommendations or any performance comparisons ??

Some people told me that the sounding charateristics from wooden rack are different from steel rack. Is it true ??

:sorry: :sorry: :sorry: :sorry: :sorry: :sorry:


Raymondwan, I have linn skeet under my SS racks in the situation that I described above. Linn skeet is very good and important to SS rack, but it just can't cure everything.

I believe the material used to built a rack has a large effect on the sound, no doubt. A high hand told me wood rack add "live" to HiFi sound but I have no experience in wooden rack except my old ikea wood rack which is very "blur sound" in my memory, mainly due to( I think) the poor quality of wood used in that rack.

By the way, SS IS NOT BAD, :clap2hands :clap2hands I like them and I am still using them.
ys
Fun區 - 揸Fit人
Fun區 - 揸Fit人
  頭像
 
文章: 3516
來自: Ma On Shan

註冊時間:
2005-04-05, 09:44

文章發表人 Raymond Wan 發表於 2005-04-24, 00:20

ys hing

Thanks for your additional information and confirmation that you have already used Linn Skeet.

:sorry: :sorry: :sorry: :sorry: :sorry: :sorry:

As I am not in a hurry to purchase a new Solidsteel rack to replace my present wooden MDF rack, I will consult more opinion from other brothers as well as saving adequate for the coming purchase.

:004: :004: :004: :eusa_dance: :eusa_dance: :eusa_dance:
Have 100% Fun on Sharing AV & HiFi Subjects and Knowledge
圖檔
My Subconscious M&K Combos
圖檔圖檔圖檔圖檔
Welcome to My AV World: Home Theatre
Raymond Wan
Fun區皇室 - PinkG首腦
Fun區皇室 - PinkG首腦
  頭像
 
文章: 26231
來自: 中國一幅地

註冊時間:
2004-11-22, 21:08

文章發表人 cliff 發表於 2005-05-08, 17:08

初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:
cliff
Fun區 - 小頭目
Fun區 - 小頭目
  頭像
 
文章: 155

註冊時間:
2005-03-05, 12:03

文章發表人 初哥 發表於 2005-05-08, 17:16

cliff 寫:初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:

ok,明日post上黎!!!! :share: :share: :devil: :devil: :devil:
圖檔
初哥
Fun區正義聯盟 - 冇雀隊長
Fun區正義聯盟 - 冇雀隊長
  頭像
 
文章: 121663
來自: LLMH

註冊時間:
2005-03-18, 15:34

文章發表人 Romrom-100Fun 發表於 2005-05-08, 17:38

Solid Steel H6.3 :a012: :great: :004:

Can bear very heavy equipments
Sound neutral

but

:money: :cutcut: :money: :cutcut:
圖檔
Romrom-100Fun
Fun區皇室 - 出野大魔王
Fun區皇室 - 出野大魔王
  頭像
 
文章: 13580
來自: 太陽系 - 地球 - 北半球 - 南中國 - 廣東省

註冊時間:
2004-12-01, 18:43

文章發表人 cliff 發表於 2005-05-08, 18:02

初哥 寫:
cliff 寫:初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:

ok,明日post上黎!!!! :share: :share: :devil: :devil: :devil:


:sorry: :sorry: :sorry:
cliff
Fun區 - 小頭目
Fun區 - 小頭目
  頭像
 
文章: 155

註冊時間:
2005-03-05, 12:03

文章發表人 初哥 發表於 2005-05-09, 15:15

cliff 寫:初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:

Cliff兄,你要既相
附加檔案
solidsteel1.JPG
solidsteel1.JPG (125.97 KiB) 被瀏覽 4835 次
圖檔
初哥
Fun區正義聯盟 - 冇雀隊長
Fun區正義聯盟 - 冇雀隊長
  頭像
 
文章: 121663
來自: LLMH

註冊時間:
2005-03-18, 15:34

文章發表人 Siu 發表於 2005-05-09, 19:25

how to分新舊款? :sorry: :sorry:
Siu
Fun區 - 黑龍總司令
Fun區 - 黑龍總司令
  頭像
 
文章: 7728
來自: 從來處來 歸去處去

註冊時間:
2004-12-05, 13:24

文章發表人 cliff 發表於 2005-05-10, 14:16

初哥 寫:
cliff 寫:初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:

Cliff兄,你要既相


咦,真係有分別喎,我隻label係平面,你隻係凸面
附加檔案
CIMG6997.jpg
CIMG6997.jpg (67.78 KiB) 被瀏覽 4811 次
cliff
Fun區 - 小頭目
Fun區 - 小頭目
  頭像
 
文章: 155

註冊時間:
2005-03-05, 12:03

文章發表人 初哥 發表於 2005-05-10, 14:18

cliff 寫:
初哥 寫:
cliff 寫:初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:

Cliff兄,你要既相


咦,真係有分別喎,我隻label係平面,你隻係凸面

係呀,我隻有滴膠面既 :love_china: :love_china: :love_china: :a009:
圖檔
初哥
Fun區正義聯盟 - 冇雀隊長
Fun區正義聯盟 - 冇雀隊長
  頭像
 
文章: 121663
來自: LLMH

註冊時間:
2005-03-18, 15:34

文章發表人 熾天使 發表於 2005-05-10, 14:55

都冇為意添 :selfpun: :selfpun:
熾天使
Fun區 - 揸Fit人
Fun區 - 揸Fit人
  頭像
 
文章: 4899
來自: 永恆國度

註冊時間:
2004-11-27, 15:13

文章發表人 cliff 發表於 2005-05-10, 15:00

初哥 寫:
cliff 寫:
初哥 寫:
cliff 寫:初哥兄,H5有冇分新舊款,可唔可以影幅右上角label睇下 :sorry:

Cliff兄,你要既相


咦,真係有分別喎,我隻label係平面,你隻係凸面

係呀,我隻有滴膠面既 :love_china: :love_china: :love_china: :a009:


唔知仲有冇其他野唔同呢?
cliff
Fun區 - 小頭目
Fun區 - 小頭目
  頭像
 
文章: 155

註冊時間:
2005-03-05, 12:03

上一頁

回到 影音至硬 fun 區